Xerox 6279 - Scan to Mailbox Feature Selection

Follow steps 5 through 7 for default templates:
5. Select Template from the Scan to Mailbox screen.
6. Choose from a previously saved template or select an Unused one and create a new
uniquely named one and save it.
7. Check off System Power On Default if desired. The customized saved template
displays at power up.
Step 2: Selecting Scan to Mailbox Features
Additional selections from the Scan to Mailbox screen are shown below:
• Rendering (Output Type)
• File Format (Single-page and Multi-page)
• Original Type
• Compression
•
Table 17: Scan to Mailbox Features
CompressionOriginal TypeFile
Format
Rendering
CCITT4Photo (Halftone)
Photo (Contone)
Text/Photo
Text/Line
Text/Line (Clear)
TIFF
PDF
CALS
B & W (1-bit)
CCITT4Photo (Halftone)
Photo (Contone)
Text/Photo
Text/Line
Text/Line (Clear)
TIFF
PDF
CALS
Snap to Black (1-bit)
Packbits
Raw
Photo (Halftone)TIFFGrayscale (8-bit)
Normal, Best
Compression, Best
Image Quality
Photo (Contone)
Text/Photo
Text/Line
Text/Line (Clear)
PDF
JPEG
Grayscale (8-bit)
Packbits
Index
Index ED
Photo (Halftone)
Photo (Contone)
Text/Photo
TIFF
PDF
JPEG
Color (24-bit)
1. Select the Output Type Rendering to generate the electronic file.
2. Select the Output File Format type desired.
3. Select the Original Type you are scanning.
3-17
Xerox
®
6279
®
Wide Format Solution
Copy/Scan User Guide
Scanning Documents