2. Select the Recall tab.This feature allows you to do the following:
• Templates - save commonly run jobs with special settings for document types and
image quality enhancements. Refer to the Copy Strategies for Special Documents
section in the Product Overview for examples.
• Recall - stores the last scanned job run at the final state whether complete or
incomplete due to an interuption. The incomplete job can be resumed and finished.
The job is retained until printed or deleted.
• Delete - removes the file and eliminates the storage consumed in memory.
• View Last Scan - allows you to review the last scanned image.
.
A System Power On Default template can be set to save time and redundancy
programming features for commonly run jobs.
3. Select Template.
4. Check off System Power On Default.
The customized saved template displays at power up.
View Last Scan
After scanning your document, you are given a scaled down image on which you can
zoom in and out on the areas you select.
If the View Last Scan button is not present on the Recall tab, it has been disabled by
the System Administrator and View Last Scan is not available.
This feature is enabled or disabled by the System Administrator within
General Administration > Control Panel > Set Scan Display.
Xerox
®
6279
®
Wide Format Solution
2-24
Copy/Scan User Guide
Copying and Printing Documents
To Next Page
Loading...
Need help?
General
