Cleaning the Document Glass, Sensors, Feed Rollers, and
Calibration Strip
The Scanner Document Glass, Sensors, Document Feed Rollers, and Calibration Strip
must be kept clean to ensure optimized image quality for scanned images. Clean these
on a regular basis and whenever they become soiled.
1. Power the machine off as directed in System Power Off Procedure.
2. Lift up the Scanner Latch.
3. Firmly lift the Scanner Unit to the open position.
The following illustrations depict the scanner components that require cleaning.
7-9
Xerox
®
6279
®
Wide Format Solution
Copy/Scan User Guide
Maintenance
To Next Page
Loading...
Need help?
General
