2. Move the printer Power switch to the On position (up).
3. Press the Power button on the front of the Controller to turn it on.
The Power button indicator will illuminate. The Control Panel will display the message
“Printer Warming Up”. The machine will be print-ready in about 3 minutes.
System Power Off Procedure
CAUTION
Powering down the system incorrectly may result in data corruption and a service
call.
The system shutdown selection allows the Controller to power down correctly. System
Shutdown is performed through the Web Printer Management Tool or through the
System Administration screen. In some environments, only authorized persons will be
allowed to power down the system, therefore requiring the System Administrator
password.
Xerox
®
6279
®
Wide Format Solution
1-16
Copy/Scan User Guide
Product Overview
To Next Page
Loading...
Need help?
General
