4. Here you will select the same media you load in the trays, which is your desired output.
TIP
If you change the roll, tray, media type or the media series (such as changing
from ARCH-1 to ANSI), you must specify the new media type and series on the
Media Status and Setup screen.
You do not have to change anything on the Media Status and Setup screen if you put
the same roll, tray, or manual feed media in the machine that is listed on the screen.
Accessing Media Settings
1. Select the Services button on the Control Panel.
The Services Menu displays.
2. Select Machine Info.
The Machine Information screen displays.
6-5
Xerox
®
6279
®
Wide Format Solution
Copy/Scan User Guide
Machine Information
To Next Page
Loading...
Need help?
General
