6. Select Close to return to the Machine Information screen.
NOTE
In order for the 6279 to successfully complete a print job, the print job attributes,
such as the media size and type must be supported by the printer. The printer
must be equipped with the print media in the correct size to print. If the attributes
specified by the print job are not supported by the printer, a media mismatch
occurs and the printer is unable to print the job or will print the job on different
media.
If you get a “Media Mismatch” error screen like the one shown above, follow the
instructions to resolve the media mismatch condition.
Print Reports Tab
The Print Reports selection will allow the user to print one of several reports which show
the hardware and software configurations of your printer.
• Configuration Test Print (a Printer Configuration Report)
• Setup Test Print (a Printer Settings Report)
• Pen Palettes Report (All or One)
• PostScript Test Print (shows the configuration)
• All Test Prints (all four of the above print as a single job)
6-7
Xerox
®
6279
®
Wide Format Solution
Copy/Scan User Guide
Machine Information
To Next Page
Loading...
Need help?
General
