Xerox 6279 - Step 1: Selecting a Mailbox and Using Templates

Step 1: Selecting a Mailbox and Using Templates
Scanning a copy begins by displaying the Scan to Mailbox screen on the User Interface.
Once that is done, set up the scan job by selecting the necessary features from the Scan
to Mailbox, Image Quality and Advanced Settings tabs.
NOTE
You must first specify the destination of the scanned image data before scanning
can begin.
1. Select Scan to Mailbox.
The screen displays with the following:
1. Destination (mailbox or removable device name)
2. Template (customized format)
2. Select Destination.
The Select a Destination screen displays.
3-15
Xerox
®
6279
®
Wide Format Solution
Copy/Scan User Guide
Scanning Documents