6. Install the new Waste Toner Bottle.
NOTE
When you install a new Waste Toner Bottle in the provided area, make sure the
bottle rests behind the small lip at the bottom to hold the bottle firmly in place.
Otherwise the machine may not detect that the bottle is in place.
7. Close the Waste Toner Bottle Door.
8. Move the Upper Unit Release Lever toward you.
TIP
This lever must be pulled toward you before you can close the Upper Unit. To
avoid getting oil from your hands on the metal parts of the machine, touch only
the green parts.
7-7
Xerox
®
6279
®
Wide Format Solution
Copy/Scan User Guide
Maintenance
To Next Page
Loading...
