Copy
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
5-21
After placing the document on the document glass, make sure to set the size and orientation of the
document.
Note If the document size is larger than the original size, the image may be cut off or may have
shadows at the edges. Make sure to choose an appropriate document size.
1. Select Original Size , and then press the OK button.
2. Select the document size, and then press the OK button.
Auto The machine automatically detects the document size from among the
supported standard sizes.
Fixed document size
(preset)
Select the size of the placed document.
Original Size is automatically set to Auto when the document is placed in the
document feeder.
Customs 1 to 5 You can select the registered paper size.
For information on registering Customs 1 to 5, refer to Custom Paper Size Settings
on page 9-18.
Custom Size Select Custom Size to set a non-standard document size. You can set a Y direction
(vertical) between 86 and 297 mm (in 1 mm increments), and X direction
(horizontal) between 86 and 432 mm (in 1 mm increments).
Off
Pages per Side
...
Auto
Reduce/Enlarge
...
Auto
Original Size
...
Copy
1
111
Original Size
Qty.
1
A3 (297x420mm)
Auto
A4 (297x210mm)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
