Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-51
Security Settings
System Administrator Passcode
Used to set the passcode for entering System Administration mode.
You can enter between 4 to 6 numbers from 0 to 9.
1111 (four "1" digits) is set at the time of factory shipment.
Follow the steps below to make the settings.
1. In the Tools screen, select Security Settings, and then press the OK button.
For information on how to display the Tools screen, refer to System Settings Procedure on page 9-
1.
2. Select System Admin. Passcode, and then press the OK button.
3. Enter the desired passcode in the New Passcode field.
Note The entered passcode is displayed as asterisks (*).
4. Press the OK button.
System Settings
...
Security Settings
...
Tools
Fax Settings
...
Security Settings
System Admin. Passcode
...
System Admin. Passcode
New Passcode
[* * * * * ]
To Next Page
Loading...
