Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-30
Copy Settings
Used to set the functions for the Copy feature.
For information on how to display the Copy Settings screen, refer to System Settings Procedure on
page 9-1.
Sharpness
You can select Soften +2, Soften +1, Normal, Sharpen +1, or Sharpen +2.
Normal sets the sharpness at the standard level; Soften +2 sets it lower; Sharpen +2 sets it higher.
Normal is set at the time of factory shipment.
For more information, refer to Scan Settings > Sharpness on page 9-32.
Background Suppression
Sets whether to suppress the document’s background color.
You can select Off or On.
On is set at the time of factory shipment.
For more information, refer to Scan Settings > Background Suppression on page 9-32.
Back. Suppression Level
Sets the background suppression level used when Background Suppression is set to On in Copy
Settings.
You can select from Low, Normal, Higher +1, Higher +2, and Higher +3. Normal is the standard
suppression level, Low is the lowest suppression Level, and Higher +3 is the highest suppression level.
Normal is set at the time of factory shipment.
For more information, refer to Scan Settings > Back. Suppression Level on page 9-32.
Reduce/Enlarge Preset
Used to set the preset Reduce/Enlarge value by selecting Copy > Reduce/Enlarge in the Default
Settings.
You can set a value between 25 and 400% (in 1% increments).
400% is set at the time of factory shipment.
For more information, refer to Default Settings > Copy > Reduce/Enlarge on page 9-8.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
