Xerox WorkCentre 5024

Maintenance
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
12-10
Follow the steps below to initialize the counter.
1. Turn on the machine power. Refer to Power Source on page 3-7.
2. Enter System Administration Mode. Refer to Entering System Administration Mode on page 9-1
for more information.
3. Press the and buttons to select. System Settings on the Tools screen.
4. Press the OK button.
Note To return to the Tools screen, press the Clear All button. To return to the previous screen,
press the Back or s button.
5. Select Maintenance from the System Settings screen.
6. Press the OK button
7. Enter the passcode 950807 on the Maintenance screen using the numeric keypad.
8. Press the Start button.
Start button