Product Overview
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
3-22
Logging in to the Machine in Multiple Account Mode
The following procedure describes how to log in to the machine when the machine is in Multiple
Account Mode.
For more information, refer to User Control on page 9-48.
1. Select a user.
The passcode input screen appears.
2. Use the numeric keypad to enter the passcode which corresponds to the account number of the
selected user, and then press the OK button.
Note The passcode is the same as the system administrator’s passcode used for entering System
Administration mode from the control panel. For more information, refer to Entering System
Administration Mode on page 9-1.
3. Press the Start button to confirm the entered passcode.
If the entered passcode is correct, the machine enters Copy Mode.
User 02
...
User 03
...
Select User
User 01
...
[* * * * * ]
Enter Login Passcode
To Next Page
Loading...
