Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-46
24H is set at the time of factory shipment.
1. In the Clock screen, select Time Format, and then press the OK button.
2. Select the time display format, and then press the OK button.
Audio Tones
Used to set the machine's operation and status audio tones.
All Tones
Sets the volume of all the machine's tones. Use this setting to set all the tones to the same volume.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Off is set at the time of factory shipment.
Selection
Sets the volume of the tone that sounds when selectable buttons are pressed on the control panel.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Off is set at the time of factory shipment.
Control Panel Alert
Sets the volume of the tone that sounds when non-selectable buttons are pressed on the control panel.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Off is set at the time of factory shipment.
Machine Ready
Sets the volume of the tone that sounds at power on and at other times to indicate the machine is
ready for copying or printing.
Date Format
...
yy/mm/dd
Time Format
...
24H
Clock
Date & Time
...
To Next Page
Loading...
Need help?
General
Weight and Dimensions
