Xerox WorkCentre 5024

Fax
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
6-23
2. Select the copy method, and then press the OK button.
Edge Erase
You can set to erase the black shadows created around the edge of the paper when scanning a fax with
the document cover open or copying a bound document.
You can set a value between 0 and 10 mm (in 1 mm increments) for the Edge Erase function.
Note The value set for Edge Erase applies to all four edges of the document.
1. Select Edge Erase, and then press the OK button.
2. Use the numeric keypad to enter a value, and then press the OK button.
ECM
Used to resend pages for which transmission failed due to transmission errors or other problems.
1. Select ECM, and then press the OK button.
Off Select Off for a one-sided document.
On Select On for a two-sided document.
2 Sided
On
Off
2 Sided ... Off
Polling
... Off
Edge Erase ... 2mm
Ready to Fax: 0123457890
Edge Erase
[0 - 10]
2
OO
Edge Erase ... 2mm
2 Sided
... Off
ECM ... On
Ready to Fax: 0123457890