Xerox WorkCentre 5024

Product Overview
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
3-18
About the Default Display Screen
The Default Display screen lets you change the Default Display Screen — the screen displayed when
turning the power on and after returning from Energy Saver mode.
Setting the Default Display
You can set the default displayed screen from Copy, Fax, or Scan screen.
Note Some screens cannot be set on some models.
1. Press and hold the Log In/Out button for at least 4 seconds.
The passcode input screen appears.
Note The passcode is initially set to "1111"(four "1" digits).
2. Use the numeric keypad to enter the passcode, and then press the OK button.
Note The Log In/Out button lights when the machine is in System Administration mode.
Log In/Out button
[ ]
System Admin. Passcode
[* * * * * ]
System Admin. Passcode