Environment Settings
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-33
•Maximum Login Attempts
When login attempts using the system administrator’s user ID fail repeatedly, access is denied
when the number of failed attempts reaches the number set here.
Specify a number between 0 and 10. Specify 0 to disable this setting.
The total number of failed authentication attempts is reset when authentication is successful or
the system is restarted. (Default: 5)
Apply button
You can apply changes by pressing this button.
Support Tab
The links to support information is displayed. The link settings can be changed.
Support
Change Settings button
You can change the links to support information by pressing this button.
•Name
You can enter the link name (between 1 and 63 ASCII code characters).
•URL
You can enter the link address (between 1 and 63 alphanumeric characters including the at
symbol (@), percent sign (%), period (.), colon (:), forward slash (/), underline(_), hyphen (-), tilde
(~), question mark (?), and ampersand (&), which are valid).
Apply button
You can apply changes by pressing this button.
Address Book Tab
The list of location information where the scanned data is stored is displayed.
You can register the total of 30 E-mail and Server addresses.
View All Names
Address Number
The registered numbers (4 digits) of the E-mail or Server addresses are displayed.
Name
The registered names of the E-mail or Server addresses are displayed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
