Product Overview
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
3-26
Setting the Options Configuration
When the Network Kit is installed, you can retrieve information of machine configuration into the print
driver.
Update the information of machine configuration when any optional component is changed.
When Using the Ethernet Interface
You can load the machine's option configuration automatically to the print driver.
Notes
• This function is not available for some models. The Network Kit is required. For more information,
contact our Customer Support Center.
• When using this function, activate the SNMP port. (Default: Enabled)
• If you failed to retrieve information of machine configuration or are using the USB interface
connection, set the information of machine configuration manually. For more information, click
Help on the screen to display Help Information.
Follow the steps below to set the option configuration.
1. From your computer’s Start menu, select Printer and Faxes to display the property of your
machine.
Note Some operating systems display Printer or Devices and Printers instead of Printer and
Faxes.
2. Click the Configuration tab.