Environment Settings
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-29
•Password
You can enter the password for authentication (between 1 and 64 ASCII code characters). This
can be left blank if SMTP authentication is skipped.
•Retype Password
You can verify the authentication password you entered by re-entering it here.
Apply button
You can apply changes by pressing this button.
HTTP (Connectivity > Protocols)
You can set the HTTP protocol.
Configuration
•Connection
Enabled is displayed.
•Physical Connection
Ethernet is displayed.
• Keep Alive Timeout
The keep-alive timeout period is displayed.
•Port Number
You can set the port No. used for HTTP communication (a value between 1 and 65535). You must
set a unique number for each port. (Default: 80)
• Connection Time-Out
Set the connection timeout period from 1 through 255 seconds. (Default: 30)
•Title
You can select the display for the title displayed on a browser from None Internet Services or
Printer model - IP Address.
Apply button
You can apply changes by pressing this button.
Note Reboot the machine to enable new settings.
Defaults (Services > E-mail)
General
• Subject (Default: Scan Data from "model name")
You can enter the E-mail header (up to 128 ASCII code characters).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
