Loading Paper
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
4-4
Storing and Handling Paper
Please keep the following points in mind when storing paper
• Store paper inside a cabinet or other dry place. Paper that has absorbed moisture can result in
paper jams and lower image quality.
• After opening a package of paper, wrap and store any remaining paper. We recommend that you
store remaining paper in moisture prevention packets.
• Store paper on a flat surface to prevent bends or warping.
Please adhere to the following points when loading paper in a tray
• Align the stack of paper neatly before loading it in a tray.
• Do not use creased or wrinkled paper.
• Do not use warped or curled paper.
• Do not load paper of mixed sizes together into a tray.
• Take care not to touch the print side. Oils from your skin could adhere to the print media, which
could affect printing quality. If unavoidable, be sure to use a finger cot, gloves, or other means to
cover your fingers before touching the print media.
• LEF is recommended for heavyweight media feeds from the Tray 5 (bypass). If a misfeed occurs,
please apply an intentional upper curl to the leading edge of the paper.
• Do not load paper above the maximum fill line in Trays 1 to 5. It may cause paper jams.
• When Heavyweight Paper/Extra-HW Paper is supplied to Tray 5 and causes paper jams, reduce the
paper quantity or turn over the paper in Tray 5.
To Next Page
Loading...
