Xerox WorkCentre 5024

Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-29
IP Filter
Sets whether to restrict the IP addresses that can access the machine.
Notes
• The IP filter is a function used to suppress printing using TCP/IP.
• This setting is activated after restarting the machine.
IPv4
Sets whether to restrict the IPv4 addresses that can access the machine. When this setting is enabled,
you can register up to 10 IP addresses/subnet masks to support.
IPv6
Sets whether to restrict the IPv6 addresses that can access the machine. When this setting is enabled,
you can register up to 10 IP addresses/subnet masks to support.
Prefix Use the numeric keypad to set the prefix length of the IP address (between 1 to 128).
Gateway Address Use the numeric keypad to enter the gateway address.