Appendix
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
14-20
Sent
Item Description
No. The serial number of each outgoing fax.
Job# A document number appended automatically when the fax job is received.
Remote Terminal The sender's information, in the following priority order:
1. Name registered in Speed Dial number5/8/15(Only when the recipient has a
registered Speed Dial number.)
2. Phone number used when all digits are dialed
3. Remote ID
4. Communication mode
The Remote ID is the phone number sent by the recipient.
Start Time The time at which transmission began.
For a fax broadcast, the time at which the first transmission started.
Dura. The amount of time that was required from transmission start to end. For a fax
broadcast, this is the total transmission time for all recipients.
Groups For a fax broadcast, the number of fax broadcasts is recorded. They are recorded with
number of completed fax broadcasts on the left of the slash (/) and the total number
of fax broadcast recipients to the right of the slash (/).
Pages The number of pages sent.
The number on the left of the slash (/) is the number of pages sent normally. The
number on the right of the slash(/) is the total number of scanned pages.
This is left empty for fax broadcasts.
Mode The mode used for the transmission.
G3, ECM, SG3 (Super G3), BC (fax broadcast), or [blank] (no information)
Contents The transmission content.
BC (fax broadcast), Forward (forwarded fax), or [blank] (normal transmission)
Result The transmission result.
Done (normal end), Busy (recipient line was busy or the set number of Redials was
exceeded), Cancelled (job was cancelled), Check Remote (communication failed), XXX-
XXX (communication error)
• "Cancelled" indicates that the user cancelled the job.
• The Remote ID is the phone number sent by the recipient.
• "XXX-XXX" indicates an error code.
Total The total number of pages sent.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
