Xerox WorkCentre 5024

Maintenance
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
12-13
To ensure clean copies at all times, clean the document cover and the document glass about once a
month.
CAUTIONS:
• Do not use benzene, paint thinner, or other organic solvents. Doing so might damage the paint or
coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction
or damage documents during copying, or scanning.
1. Wipe the document cover with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft, dry cloth.
Notes
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove dirt easily, gently wipe the document cover with a soft cloth moistened with
a small amount of neutral detergent.
2. Wipe the document glass with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft, dry cloth.
Notes
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove dirt easily, gently wipe the document glass with a soft cloth moistened with
a small amount of neutral detergent.
Cleaning the Document Presser and the Narrow Glass Strip
If the document presser or narrow glass strip becomes soiled, smudges may appear on copies, or
scanned documents and the machine may not properly detect document sizes.