Xerox WorkCentre 5024

Environment Settings
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-3
(Setting at the time of factory shipment: Enabled)
Note This feature is available when the Network Kit is installed.
For information on how to activate the SMB port, refer to Activating the Communication Port To Use on
page 2-11.
For information on how to use this feature, refer to Sending Scan Data to PC over Network - PC
(Network) on page 7-10.
Fax Feature
The machine supports the following communication networks for fax transmissions:
• Public switched telephone network (PSTN)
• Private branch exchanges (PBX)
You must also make settings in Region and Clock to use the Fax functions on this machine.
Note This option is available when the Fax Kit is installed.
For information on how to make the region setting, refer to Region on page 9-38.
For information on how to make the clock settings, refer to Clock on page 9-43.