Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-54
Copy Limit (Unit: Impressions)
Used to display or set the maximum number of impressions the user is permitted to copy.
1. Press Copy Limit (Unit: Impressions).
2. To change the value, use the numeric keypad to enter the maximum number of permitted
impressions.
Notes
- You can set a value between 0 and 255 (Unit: 1,000 impressions) for the maximum number
of permitted impression . Set 0 to disable the restriction on maximum number of copies.
- The user's current total number of impressions is reset to 0 when the maximum number of
permitted impressions is changed.
3. Press the OK button.
Reset Copied Impressions
You can select whether to reset the total number of copied impressions for all registered users, User01
to User30, at once. Click Yes to reset the total number of impressions copied to 0.
Follow the steps below to perform the operation.
1. In the Tools screen, select User Management, and then press the OK button.
For information on how to display the Tools screen, refer to System Settings Procedure on page 9-
1.
User 01
Login Passcode
...
Copied Impressions
...
Copy Limit (Unit: Impressions
...
)
Copy Limit (Unit: Impressions)
15 (x 1000)
[0 - 255]
Security Settings
...
User Management
...
Tools
System Settings
...
To Next Page
Loading...
Need help?
General
Weight and Dimensions
