Environment Settings
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-24
- Preferred DNS Server:
Used to enter the DNS server address manually.
- Alternate DNS Server 1-2:
Used to enter alternate DNS server addresses manually.
• Dynamic DNS Registration (IPv4)
Sets dynamic updating of the IPv4 DNS server. Checking Enabled enables dynamic updating of
the DNS server. Checking Overwrite enables dynamic updating of the data in the DNS server
database.
• Dynamic DNS Registration (IPv6)
Sets dynamic updating of the IPv6 DNS server. Checking Enabled enables dynamic updating of
the DNS server. Checking Overwrite enables dynamic updating of the data in the DNS server
database.
• Generate Domain Search List Automatically
Check Enabled to create domain search lists automatically.
• Domain Name 1-3
Used to enter the name of the domain to search (up to 255 characters).
• Connection Time-Out
Sets the timeout period when searching for domains (between 1 and 60 seconds). (Default: 1)
• DNS Resolution via IPv6 First
Check Enabled to prioritize IPv6 for resolving DNS names when IP mode is set to Dual Stack.
(Default: On)
Apply button
Press this button to confirm the entered settings.
Note Reboot the machine to enable new settings.
SNMP Configuration (Connectivity > Protocols)
You can set the SNMP protocol.
General
•SNMP Port Status
You can check Enabled to use SNMP. (Default: On)
• Edit SNMP v1/v2c Properties button
You can make advanced SNMP v1/v2c settings by pressing this button. (Default: On)
- Community Name (Read Only):
You can enter the community name to acquire (up to 32 ASCII code characters). (Default:
blank (public))
To Next Page
Loading...
Need help?
General
Weight and Dimensions
