Environment Settings
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-6
Setting the Network Environment
This section describes how to make the settings needed to use the TCP/IP protocol.
The machine supports IPv6 addresses in an IPv6 network environment. For more information, refer to
Setting the Machine's IP Address (IPv6) on page 2-7.
Setting the Machine's IP Address (IPv4)
To use the TCP/IP protocol, you must set the machine's IP address.
By default, the machine is set to obtain its IP address automatically.
This setting automatically sets the machine's IP address when the machine is connected to a network
containing a DHCP server.
Print the System Settings Report to check whether the machine's IP address has already been set.
You can also check the IP address in the following methods:
•On the Machine Status screen
•Using the To ols menu items
•Using Xerox
®
CentreWare
®
Internet Services
For information on how to print the System Settings Report, refer to Printing Reports/Lists on page 10-
7.
For information on how to check on the Machine Status screen, refer to Checking the Machine’s IP
Address on page 10-5.
For information on how to check using Tools, refer to TCP/IP on page 9-27.
For information on how to check using Xerox
®
CentreWare
®
Internet Services, refer to TCP/IP
(Connectivity > Protocols) on page 2-22.
If the machine's IP address has not been set, set the IP address by using the Printer Setup Utility for
Setting IP Address included in the Driver CD Kit or using the control panel to change the Get IP
Address setting to Control Panel.
Notes
• If the network has a DHCP server, the machine's IP address may be changed, so check the address
periodically.
• The machine can acquire address information automatically by using a BOOTP or RARP server. To
use a BOOTP or RARP server to acquire the machine's IP address, use the control panel to change
the Get IP Address setting to BOOTP or RARP.
For information on how to use the Printer Setup Utility for Setting IP Address, refer to When Using the
Printer Setup Utility for Setting the IP Address on page 2-7.
For information on how to set the IP address from the control panel, refer to TCP/IP on page 9-27.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
