Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-47
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.
Job Complete
Sets the volume of the tone that sounds to indicate a job has completed normally.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.
Fault
Sets the volume of the tone that sounds to indicate a job has failed.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.
Alert Tone
Sets the volume of the tone that sounds to indicate a job has failed and been put on hold due to a
problem such as a document/paper jam.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.
Out of Paper
Sets the volume of the tone that sounds to indicate a job has failed and been put on hold because the
paper tray has run out of paper.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.
Consumables
Sets the volume of the tone that sounds to indicate the toner cartridge needs to be replaced.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.
Auto Clear
Sets the volume of the tone that sounds 5 seconds before the display will automatically return to the
Default Display screen when Auto Reset has been set.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
