Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-40
Enable Auto Print
The machine automatically prints transmission results after every 50 faxes sent/received.
Note The maximum number of saved transmission logs is 100 for sent logs and 300 for received logs.
When Enable Auto Print is set to On, fax transmission is disabled when the number of saved documents
in either the sent or receive log exceeds the maximum number of saved logs if the report cannot be
printed due to the machine being out of paper or a similar issue. If sending or receiving faxes again,
manually print an Activity Report.
For information on how to print an Activity Report manually, refer to Printing Reports/Lists on page 10-
7.
Disable Auto Print
The machine does not print transmission results.
This cannot be selected if the number of faxes sent or received exceeds 40.
Transmission Report
Sets the machine's transmission result printing operation after sending a fax.
Print On Error is set at the time of factory shipment.
Note The Transmission Report cannot be printed manually.
Always Print
The machine prints the transmission result after sending each fax.
Print On Error
The machine prints the transmission result when fax transmission fails.
Never Print
The machine does not print the transmission result regardless of whether fax transmission succeeds or
fails.
Broadcast Report
Sets the operation to print machine's transmission result after sending a fax "broadcast" (the same fax
sent to multiple recipients at once).
Always Print is set at the time of factory shipment.
Note The Broadcast Report cannot be printed manually.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
