Environment Settings
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
2-21
Note Double-byte characters cannot be used in Xerox
®
CentreWare
®
Internet Services.
Properties Tab
Description
Energy Saver Settings (General Setup)
Note Neither of Low Power mode or Sleep mode can be disabled.
Add New Name P. 2-35
Management P. 2-35
Import Data
P. 2-35
Export Data
P. 2-36
Delete All Names
P. 2-36
Item Description
Machine Model The product name is displayed.
Serial Number The product serial number is displayed.
Machine Name You can enter the printer name (up to 32 ASCII code characters excluding
colons (:), equal signs (=), at symbols (@), or asterisks (*), which are not
valid). (Default: "WorkCentre 5022" or "WorkCentre 5024")
Location You can enter the machine's location (up to 255 ASCII code characters).
Contact Person You can enter the contact person's information (up to 255 ASCII code
characters).
Administrator's E-mail Address You can enter the e-mail address of the system administrator (up to 128
characters).
This information is required for sending an e-mail.
Item Description
Time to Low Power Mode You can set the time elapse from the last operation until the machine
enters Low Power mode. You can set a value between 1 and 60 minutes.
(Default: 1)
Time to Sleep Mode You can set the time elapse from Low Power mode until the machine enters
Sleep mode. You can set a value between 1 and 239 minutes. (Default: 1)
Apply button You can apply changes by pressing this button.
Tab Menu Item See Page:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
