Xerox WorkCentre 5024

Machine Status
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
10-12
Quick-Button Selection Timer
You can set the displayed time length of the setting screens when a Quick-Button is pressed.
By default, the time length is set to 2 seconds.
Press the Machine Status button.
4. Select Quick-Button Selection Timer, and then press the OK button.
5. Select the desired time, and then press the OK button.
Machine Status button
ID Card Guidance ...
Quick-Button Se ...
Machine Status
Notification Di
...
Toner Status:
OK
Drum Status:
OK
3 seconds
4 seconds
Quick-Button Selection Timer
2 seconds
4 seconds