Maintenance
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
12-14
To ensure clean copies at all times, clean the document presser and narrow glass strip about once a
month.
CAUTIONS:
• Do not use benzene, paint thinner, or other organic solvents. Doing so might damage the paint or
coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction
or damage documents during copying or scanning.
1. Wipe the document presser with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft, dry cloth.
Notes
• Do not press the film with excessive force as it can be easily damaged.
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove dirt easily, gently wipe the document presser with a soft cloth moistened
with a small amount of neutral detergent.
2. Wipe the narrow glass strip with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft dry cloth.
Notes
• Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove dirt easily, gently wipe the narrow glass strip with a soft cloth moistened
with a small amount of neutral detergent.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
