Xerox WorkCentre 5024

Too ls
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-6
Send Header Used to set whether to send information including the print
date and sender information on outgoing faxes or not.
P. 9-36
Company Name Used to register the sender name. P. 9-36
Fax Number Used to register the machine's fax number. P. 9-36
Forward Used to set whether to forward the incoming fax or not. P. 9-36
Auto Reduce On Receipt Used to set whether to reduce the image size when the
incoming data is too large for the output paper.
P. 9-37
Border Limit Used to set the image size limit at which to split the page
when the incoming data is too large for the output paper.
P. 9-37
Receive Size Used to restrict the paper size of faxes that can be received. P. 9-37
Print Size (Received Letter) Used to set whether to print the incoming Letter size data
on Letter paper or A4 paper.
P. 9-38
Immediate Fax Switch Used to set the remaining memory level at which to move
to immediate communications during fax transmission.
P. 9-38
Off Hook Level Used to set the detection level of an off-the-hook receiver
when using an external phone.
P. 9-38
Region Used to set the region name. P. 9-38
Activity Report Used to set whether to automatically print out the results of
sent and received documents that are stored in memory.
P. 9-39
Transmission Report Used to set the method used to print fax transmission
results.
P. 9-40
Broadcast Report Used to set the method of printing transmission results
when "broadcasting" (sending the same fax to multiple
recipients at once).
P. 9-40
Protocol Report Used to set the method used to print protocols. P. 9-41
System Settings Used to set other functions. P. 9-42
Power Saver Timer Used to set the amount of time the machine waits before
entering its power-saving modes.
P. 9-42
Auto Reset Used to set the amount of time the machine waits before
resetting the screen while an operation is being performed.
P. 9-42
Auto Print Used to set the amount of time the machine waits before
starting to print and after receiving a print job.
P. 9-42
Idle Timeout Used to set the amount of time the machine waits before
documents are added.
P. 9-43
Job Cancel Used to set whether to automatically cancel the job when a
job error occurs.
P. 9-43
Clock Used to set the time on the machine's system clock. P. 9-43
Item Description See Page