Yanmar 3JH3E - 2-4 Other material

Chapter
10
Disassembly and Reassembly
~2~-~D~is~a~ss~e~m....;.bl~y_a~n_d_R_e_as_s_e_m_b_l_y_T_o_o_l_s
___________________
i4JHMBXQE
2-4 Other material
Items
Three Bond
No.1
TB1101
Three Bond
No.2
TB1102
Three Bond
ai
No.3
2,<'.
<I)
TB1103
(Cl
Cl
J2
::::i
Three Bond
CT
::.:J
No.4
TB1104
Three Bond
No.10
TB1211
Three Bond
TB1212
Three Bond
Q)
TB1401
>
"iii
Q)
.c
-0
Lock tight
<:
SUPER
TB1324
Seal Tape
O-ring
kit
a,
Brand name
~
(LOWCOL
PASTE)
::::i
.
!!!
Brand name
-0
E
(PASTE SPRAY}
::::i
-
c::
c::
(I)
r:i
-0
Brand name
~~
:::l
0
(MOL YPASTE)
- E
a..~
w
Usual Contents
200g
(1
kg
also aviable)
200g
(1
kg
also aviable}
150g
200g
(1
kg
also aviable}
100g
1
00g
200g
50g
5m
round tape
¢
1.92-m dia.:1
¢
2.42-m dia.:1
¢
3.12-m dia.:1
,f,
3.52-m dia.:1
,f,
5.72-m dia.:1
50g
330g
50g
Features and application
Non-drying liquid gasket; solventless type, easy to remove, superior
in
seawa-
ter resistance, applicable to various mating surfaces.
Non-drying liquid gasket; easy to apply, superior
in
water resistance and oil
resistance, especially
superior
in
gasoline resistance.
Drying film, low viscosity and forming of thin film, appropriate for mating sur-
face of precision parts.
Semi-drying viscoelastic material, applicable to non-flat surface having many
indentations and protrusions, superior
in
heat resistance, water
resistance, and oil resistance.
Solventless type silicone-base sealant, applicable to high temperature areas.
(-5o·c
to 250)
Silicone-base, non-fluid type, thick application possible.
Prevention of loose bolts, gas leakage, and corrosion.
Torque required to
loosen bolt: 1 0 to 20% larger than tightening torque.
Excellent adhesive strength locks bolt semipermanently.
Sealing material for threaded parts of various pipes.
Ambient temperature range:
-150'C
to
200°C
O-ring of any size can
be
prepared, whenever required.
(Including adhesive, release agent, cutter, and jig)
For assembly of engine cylinders, pistons, metals, shafts, etc.
Spray type facilitates application work .
Prevention of seizure of threaded parts at high temperature.
Applicable to intake and exhaust valves. (stem, guide, face)
10-8
Printed
in Japan
HINSHI-H8009