YASKAWA NX100 - Independent Control Function (Optional)

8.2 Alarm Display
8-4
 Independent Control Function (Optional)
In the independent control function (multi-task job), the tasks that were being done when
the alarm occurred are also displayed.
TASK#0: Master-task job
TASK#1: Sub-task1 job (SUB1)
TASK#2: Sub-task2 job (SUB2)
TASK#3: Sub-task3 job (SUB3)
TASK#4: Sub-task4 job (SUB4)
TASK#5: Sub-task5 job (SUB5)
TASK#6: Sub-task6 job (SUB6)
TASK#7: Sub-task7 job (SUB7)