YASKAWA NX100 Maintenance Manual

2.1 Protection Through Security Mode Settings
2-8
2.1.2 User ID
User ID is requested when Editing Mode or Management Mode is operated.
User ID must be between 4 characters and 8, and they must be numbers and symbols (“0 to
9”,“-” and “.”).
 Changing a User ID
In order to change the user ID, the NX100 must be in Editing Mode or Management Mode.
Higher security modes can make changes the user ID of to lower security modes.
Operation Explanation
1 Select {SETUP} under the
main menu.
The sub menu appears.
2 Select {USER ID}. The USER ID window appears.
Main Menu Short Cut
JOB
DOUT
MOVE
END
IN/OUT
In Out
SYSTEM INFO
ARC WELDING
VARIABLE
B001
ROBOT
CF
FD/CF
SETUP
PARAMETER
DISPLAY SETUP
Aa
TEACHING COND
KEY ALLOCATION
OPERATE COND
DATE/TIME
GRP COMBINATION
RESERVE JOB
NAME
USER ID
SET SPEED
DATA
EDIT
DISPLAY
UTILITY
T
***
Main Menu Short Cut
JOB
DOUT
MOVE
END
IN/OUT
In Out
SYSTEM INFO
ARC WELDING
VARIABLE
B001
ROBOT
CF
FD/CF
SETUP
PARAMETER
DISPLAY SETUP
Aa
DATA
EDIT
DISPLAY
UTILITY
T
EDITING MODE
********
MANAGEMENT MODE
********
USER ID

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C