7.3 Input/Output Status
7-5
Modifying the Output Status
The status of universal output signal can be changed by the operation below.
Operation Explanation
1 Select the desired output sig-
nal number.
Select the status of
the desired output signal, “ ” or “ ,” in
the UNIVERSAL OUTPUT window.
2 Press [INTER LOCK] +
[SELECT].
The status is changed. ( :ON status, :OFF status)
The status of universal output signal can be changed only when the mode is set to the
teach mode.
DATA
EDIT
DISPLAY
UTILITY
Main Menu ShortCut
T
PAGE
UNIVERSAL OUTPUT
GROUP
3:DEC. 03:HEX.
OUT#0001 #10010
OUT#0002 #10011
OUT#0003 #10012
OUT#0004 #10013
OUT#0005 #10014
OUT#0006 #10015
OUT#0007 #10016
OUT#0008 #10017
NOTE
To Next Page
Loading...
