YASKAWA NX100 Maintenance Manual

7.4 System Monitoring Time Display
7-18
7.4.2 Individual Window of the System Monitoring Time Display
If the page key is pressed, or "PAGE" is selected to display the selection window for the
system monitoring time display, the servo power time, playback time, moving time, and each-
application operating time by each control group are individually displayed.
The total time of each control group here is not always the same as the time in the SYS
MONITORING TIME window because these windows show time as seen from the individ-
ual control group.
DATA
EDIT
DISPLAY
UTILITY
T
SERVO POWER TIME
ROBOT1 (2005/07/23 14:58 )
 43:51’25
STATION1 (2005/07/23 14:58
)
 43:51’25
DATA
EDIT
DISPLAY
UTILITY
T
PLAYBACK TIME
ROBOT1 (2005/07/23 14:58 )
 43:47’17
STATION1 (2005/07/23 14:58
)
 43:47’17
DATA
EDIT
DISPLAY
UTILITY
T
MOVING TIME
ROBOT1 (2005/07/23 14:58 )
 40:12’17
STATION1 (2005/07/23 14:58
)
 40:12’17
DATA
EDIT
DISPLAY
UTILITY
T
OPERATING TIME
APPLI1 (2005/07/23 14:58 )
 25:28’49
NOTE

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C