YASKAWA NX100 - 9.1.6 Maintenance Mode

9.1 Error Message List
9-16
9.1.6 Maintenance Mode
Error No. Data Error Message Contents
8010 - Too many axes
8020 - Too many I/O points
8030 - Too many boards (XFB01B (MASTER))
8031 - Too many boards (MSC01B)
8040 -
Memory error (ControlNet output condi-
tion)
8041 - Memory error (UNIWIRE CONNECT DAT
8050 - Robot model is not registered
8060 - Cannot get UNIWIRE connection data