YASKAWA NX100 - Page 166

8.3 Alarm Message List
8-62
4229
ETHERNET
ERROR
1 An error occurred in the acquisition
process of the IP address during
the IP address monitoring process
of the Ethernet function.
• When the DHCP is used, verify the DHCP
server operation and the network status.
If the error occurs again, contact your
Yaskawa representative.
2 An error occurred in the acquisition
process of subnet mask during the
network service data creation pro-
cess of the Ethernet function.
3 An error occurred in the acquisition
process of gateway during the net-
work service data creation process
of the Ethernet function.
4 An error occurred in the conversion
process of gateway address during
the network service data creation
process of the Ethernet function.
5 An error occurred in the conversion
process of DNS server address
during the network service data cre-
ation process of the Ethernet func-
tion.
6 An error occurred in the acquisition
process of domain during the net-
work service data creation process
of the Ethernet function.
7 An error occurred in the acquisition
process of SNTP server during the
network service data creation pro-
cess of the Ethernet function.
8 An error occurred in the acquisition
process of host name during the
network service data creation pro-
cess of the Ethernet function.
4229
ETHERNET
ERROR
9 An error occurred in the newest
DNS information getting process
from DHCP server in the DNS pro-
cess of the Ethernet function.
• When the DHCP is used, verify the DHCP
server operation and the network status.
If the error occurs again, contact your
Yaskawa representative.
10 An error occurred in the setting pro-
cess to update DNS information in
the DNS process of the Ethernet
function.
11 An error occurred in the setting
clearing process to update DNS
information in the DNS process of
the Ethernet function.
20 The subnet mask was not able to
be acquired in the DHCP informa-
tion update process of the Ethernet
function.
21 Subnet mask update error occurred
in the DHCP information update
process of the Ethernet function.
25 Gateway update error occurred in
the DHCP information update pro-
cess of the Ethernet function.
26 Gateway clear error occurred in the
DHCP information update process
of the Ethernet function.
Alarm Message List
Alarm
Number
Message
Sub
Code
Cause Remedy