YASKAWA NX100 Maintenance Manual

9.1 Error Message List
9-4
801 -
The group axis of designation is not con-
nection
810 - Servo power supply is limited
820 - Modification range over
930 - Undefined conveyor calibration data
940 - Forced pressure signal ON
950 - Negative correction distance
960 - I/O axis mode requesting
970 - ERRSVCPU signal error
971 - ERRCPU signal error
Error No. Data Error Message Contents

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C