Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
222
Specify the call information display
method.
Parameter:
phone_setting.call_info_display_method
Specify the horizontal scroll speed of
caller information.
Parameter:
phone_setting.incoming_call.horizontal_
roll_interval
Web User Interface
Configure display contact photo feature.
Configure display called party
information feature.
Specify the call information display
method.
Navigate to:
http://<phoneIPAddress>/servlet?p=set
tings-calldisplay&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.contact_photo_display.enable
0 or 1
1
Description:
Enables or disables the IP phone to display contact avatar when it receives an incoming call,
dials an outgoing call or engages in a call.
0-Disabled
1-Enabled
Note: It is only applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
Settings->Call Display->Display Contact Photo
Phone User Interface:
None
phone_setting.called_party_info_display.enable
0 or 1
0
Description:
Enables or disables the IP phone to display the called account information when receiving an

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English