Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
908
You can verify whether you got the correct log through the following key fields:
 <0+emerg>
 <1+alert>
 <2+crit>
 <3+error>
 <4+warnin>
 <5+notice>
 <6+info>
Syslog
Procedure
Syslog can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.c
fg
Configure syslog feature.
Parameter:
static.syslog.enable
Configures the format type of the log
messages exported to the syslog server.
Parameter:
static.syslog.format_type
Configure syslog server.
Parameters:
static.syslog.server
static.syslog.server_port
Configure the transport protocol that the
IP phone uses to export log to the syslog
server.
Parameter:
static.syslog.transport_type
Configure the lowest severity level of the
logs to be displayed in the syslog.
Parameter:
static.syslog.level
Configure the facility that generates the
log messages.
Parameter:
static.syslog.facility