Yealink SIP-T2 Series User Manual

Troubleshooting
909
Configure the IP phone to prepend the
MAC address to the log messages
exported to the syslog server.
Parameter:
static.syslog.prepend_mac_address.enable
Web User Interface
Configure syslog feature.
Configure syslog server.
Configure the transport protocol that the
IP phone uses to export log to the syslog
server.
Configure the lowest severity level of the
logs to be displayed in the syslog.
Configure the facility that generates the
log messages.
Configure the IP phone to prepend the
MAC address to the log messages
exported to the syslog server.
Navigate to:
http://<phoneIPAddress>/servlet?p=setti
ngs-config&q=load
Details of Configuration Parameters:
Parameters
Permitted
Values
Defa
ult
static.syslog.enable
0 or 1
0
Description:
Enables or disables the IP phone to upload log messages to the syslog server in real time.
0-Disabled
1-Enabled
Web User Interface:
Settings->Configuration->Enable Syslog
Phone User Interface:
None
static.syslog.format_type
0 or 1
0
Description:
Configures the format type of the log messages exported to the syslog server.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English