10 - 9
IM 4H3B1-01E
0. GENERAL SPECIFICATIONS
Recording: within ±(5% of range)
TRANSPORT and STORAGE CONDITIONS
No malfunction will occur under these conditions, however when returning to normal
operation conditions, calibration might be necessary.
Temperature: –25 to 60°C
Humidity: 5 to 95% RH (no condensation)
Vibration: 10 to 60Hz, 0.5G
Shock: less than 40G (inside packings)
OTHER SPECIFICATIONS
Clock: with Calendar function
Accuracy: ±100PPM, however not including error due to turning ON/OFF power
Panel Key-lock: By actual key: panel keys which should not be locked can be assigned
Internal Illumination: Using internal reflection of VFD display
Memory Backup: Lithium battery to preserve setting parameters. Life is approx. ten years (at room
temperature, and for standard model) and is installed inside the recorder. If the battery
runs out, this will be shown on the front panel indicator.
Machine noise: Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The maximum
sound pressure level is equal or less than 60dB (A) according to ISO7779.
SAFETY STANDARDS
Based on: Certified CSA 22.2 No.1010.1
Complies with EN61010-1
To Next Page
Loading...
