8 - 1
IM 4H3B1-01E
8. AUXILIARY SETTINGS (AUX)
8.1 Settings for Analog Recording
Chapter 8 AUXILIARY SETTINGS (AUX)
This chapter describes auxiliary settings, which are normally kept at their initial values
but, in order to use the many functions of the µR1800, might be changed. They are
grouped into
8.1 Settings for analog recording
8.2 Settings for digital printing
8.3 How to set the chart speed used when change-on-alarm or remote control is
selected.
8.1 Settings for Analog Recording
This paragraph describes:
8.1.1 How to adjust the trend recording format
8.1.2 How to set zone recording
8.1.3 How to set partial expanded recording.
Trend recording can be done depending on a fixed interval or an interval which depends
on the chart speed.
Zone recording enables you to define different bands (zones) for each channel, so the
recording traces will not overlap.
Partial expanded recording enables you to compress a part of the recording range, in
order to examine the other part of the range in more detail.
Initial values are:
TREND AUTO
ZONE 0 to 180mm
PART OFF
To Next Page
Loading...
Need help?
General
