7 - 14 IM 4H3B1-01E
7.5 How to Set the Clock
To set the date and the time of the internal clock, proceed as follows:
MENU:
SETTING PROCEDURE:
Press the MENU-key for three seconds to enter the SET mode.
Select the ‘SET=CLOCK’ display by using the UP/DOWN-keys.
Then press the ENT-key.
Enter the correct date, which is written as year/month/day (YY/
MM/DD) using the UP/DOWN/RIGHT-keys. Then press the
ENT-key. The date will be automatically updated, regardless
whether the power is turned ON or OFF. Leap years are
automatically provided.
Enter the correct time, which is written as hour:minute:second
(HH:MM:SS) using the UP/DOWN/RIGHT-keys and press the
ENT-key. When pressing the ENT-key, the clock will start.
The setting is completed.
Press the ENT-key to return to the ‘DATE=92/06/30’ display; or
press the ESC-key to go to the ‘SET=CLOCK’ display; or press
the MENU-key for three seconds to return to the Operation mode.
DATE
92/06/30
RANGE
ALARM
UNIT
CHART
CLOCK
COPY
AUX
TIME
13:30:00
SET=CLOCK
MENU
ESC
PRINT
ALARM
ACK
PRINT
ALARM
ACK
FEED
DATE=92/06/30
TIME=13:30:00
SET OK
**
3sec
MENU
ESC
3sec
PRINT
ALARM
ACK
FEED