YOKOGAWA µR1800 User Manual

3 - 2 IM 4H3B1-01E
3.1.2 Mounting
1 The µR1800 should be mounted on at least 2mm (and up to 26mm) thick steel panel.
2 Insert the µR1800 into the panel cutout.
3 Hold the bottom of the µR1800 and mount it on the panel using the mounting brackets
supplied, as shown in figure 3.1. (If still in place, remove the seals covering the holes
for the mounting brackets.)
Figure 3.1 Mounting
Mounting bracket

YOKOGAWA µR1800 Specifications

General

Brand	YOKOGAWA
Model	µR1800
Category	Data Loggers
Language	English