2 - 1
IM 4H3B1-01E
2. BEFORE OPERATION
Chapter 2 BEFORE OPERATION
This chapter describes the preparations to be made before you can operate the µR1800
recorder. To use the µR1800, it is necessary to read this chapter first.
2.1 Handling Precautions
Cleaning
The µR1800 contains many plastic parts, like door window and panels. Therefore never
attempt to clean the µR1800 with chemicals like benzene or thinner.
Static electricity
Do not bring any objects charged with static electricity near the signal terminals. This
might cause malfunction.
Insecticide sprays, etc.
Do not allow any volatile substances such as insecticides etc. to come in contact with
the front door, the operation panel, etc. Do not allow rubber or vinyl to remain in
contact with the recorder for long periods.
After use
Ensure that the power switch is turned to the OFF position.
In case of malfunction
Never continue to use the instrument if there are any symptoms of malfunction such as
unusual sounds, smell, or smoke coming from the instrument. Immediately disconnect
the power supply and stop further use of the instrument. If such abnormal symptoms
occur, contact your sales representative or nearest service center.
2.1 Handling Precautions
To Next Page
Loading...
Need help?
General
