8 - 5
IM 4H3B1-01E
8. AUXILIARY SETTINGS (AUX)
EXPLANATION:
The next figures show the recordings before and after the above settings have been
completed:
Figure 8.2 Normal Recording Example
Figure 8.3 Partial Recording Example
As can be seen from these figures, the left side of the boundary (D’) shows on 25% of
the chart the data in the range –6V to 0V. On the right side of the boundary you can see
the range 0V to 6V on 75% of the chart. Thus the scales differ on the left and right sides
of the boundary.
8.1 Settings for Analog Recording
6 (V)
050100
–6 –5 –4 –3 –2 –1 0 1 2 3 4 5
Measured value
% of full span
Recording
chart width
(180mm)
A
B
C
D
E
F
0
t
6 (V)
025 100
–6 –5 –4 –3 –2 –1
Measured value
% of full span
Recording
chart width
(180mm)
A’
B’
C’
E’
F’
0 12345
D’
t
To Next Page
Loading...
